Q. Bluetooth and navigational provision has been provided or not - NTORQ?

Bluetooth connection is provided so that you use your android phone to get all features provided with Ntorq. You have to download TVS Ntorq app from play store and sync as per the procedure given in the manual. So when you start Ntorq before riding you have start the app also. In the app you have navigation feature and start it by providing start place and end place. Then the app displays route in your mobile and sends instructons like go straight ,turn left , turn right etc to the Ntorq display unit. So you need internet connection and GPS in your mobile. So you can keep your mobile in your pocket while direction instructions will be displayed in text format on your Ntorq display.

It doesn't have an inbuilt GPS module but it provides you GPS navigation a.k.a. navigation assist with the help of your phone. You just have to download the tvs ntorq app, open the app, connect your ntorq with the phone via Bluetooth, choose your location on the map provided inside the app and there you go, the speedometer will show you turn by turn navigation on the screen. If you are still in doubt, check out YouTube videos regarding how it works with all steps explained from downloading the app to using the gps. Hope this helps!!!!!!!

In Jupiter 125 IF YOU SEE ' mac_id invalid, invalid Speedometer' error when you connect bluetooth , select any destination Navigate map will show at the right bottom Customer ID. This has to be entered in MENU > FAQ > GENERAL > NAVIGATE > CUSTOMER ID. This will solve the problem and naviassist will work showing directions