Hero XPulse 200 4V Colours

Recommended tyre pressure for front and rear tyre of Hero XPulse 200 is 1.75 kgf/cm (25 psi) / 1.75 kgf/cm (25 psi) and 2.30 kgf/cm (33 psi) / 2.50 kgf/cm (36 psi) respectively.

As part of its evolution over the Impulse, the XPulse fares better in terms of accessibility: the lower 824mm seat height favors0 shorter riders and those of you around 5’10” tall can get both your feet flat on the ground.

Yes, I had faced issues with my xpulse 200 rear monoshocker twice. One at 9000 km and second time at 13000 km. First time they fixed it under warranty. second time they said that your bike is not serviced properly (even my bike was serviced by them everytime) and not quite frequently and asked for money.This is their strategy to sell their really kit which is expensive and they are fitting poor quality monoshockers in xpulse bike.they are too afraid to admit it that their shocker is not of good quality.I am not at all satisfied by the quality of Hero motocorp. and even when I complained for the same they did not answer any queries.I asked them 'did you ever see any monoshocker broken in just 4000 km without any accidents or any rash driving or any off-roading'They did not have any answers but they never admitted that their quality is the poorest.